Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

Has rich experience in steel pipe processing, can be customized according to customer requirements according to the drawing and sample processing, assist in the development of new products.

EN 10219 S355JR Steel Tube Standard: EN 10219 Grade: S355JR, S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S275NH, S355NH Outside Diameter: 1/2 INCH - 24 INCH(CHS) 20MM × 20MM - 1200MM × 1200MM(SHS) 20MM × 30MM - 1000MM × 1500MM(RHS) Wall Thickness: 1.3MM - 22MM(CHS) 1.3MM - 50MM(SHS,RHS) The Wall Thickness Tolerance: ±5% Length: Normally used 5.8m, 6m, 12m,but we can also produces depends on client's requirement. Surface Treatment: Bare Finish, Painting, Oiling, Galvanization, 3PE, FBE coated, etc.

EN 10210 S355JR Hollow Section Standard: EN 10210 Grade: S355JR, S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S275NH, S355NH Outside Diameter: 1/2 INCH - 24 INCH(CHS) 20MM × 20MM - 1200MM × 1200MM(SHS) 20MM × 30MM - 1000MM × 1500MM(RHS) Wall Thickness: 1.3MM - 22MM(CHS) 1.3MM - 50MM(SHS,RHS) The Wall Thickness Tolerance: ±5% Length: Normally used 5.8m, 6m, 12m,but we can also produces depends on client's requirement. Surface Treatment: Bare Finish, Painting, Oiling, Galvanization, 3PE, FBE coated, etc.

< 1...181920...30 >