info@lefinsteel.com

+8615122229899

Home
About us
Products
Resource
Project
Service Capability
Certificates
Contact Us

中文

Tianjin Lefin Industrial Co.,Ltd

Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

PRODUCT

ABOUT US

Service Capability

Certificates

Project

Tianjin Lefin Industrial Co.,Ltd.

Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

OEM&ODM

Has rich experience in steel pipe processing, can be customized according to customer requirements according to the drawing and sample processing, assist in the development of new products.

PRODUCTS CENTER

Algeria HOT DIP GALVANIZED STEEL PIPE

Algeria JIS G3466 STKR400 TUBE

JIS G3466 STKR400 TUBE STANDEARD: JIS G3466 GRADE: STKR 400, STKR490 Outside Diameter: 20MM × 20MM - 1200MM × 1200MM(SHS) 30MM × 40MM - 500MM × 600MM(RHS) Wall Thickness: 1.3MM - 50MM(SHS) 2MM - 25MM(RHS) LENGTH:1M - 25M,commonly used 5.8M,6M,12M. Surface Treatment: Galvanizing, Painting. Application: Construction Structure, Containers, Offshore Oil Fields, Machinery Making, Sea Trestle

Category:

AlgeriaSTEEL HOLLOW SECTIONS

+86 22 58171905

Inquire

Product Description

Detailed Overview
JIS G3466 STKR400 is a commonly used steel grade specified in the Japanese Industrial Standards (JIS) for carbon steel pipes used in structural purposes. It is widely employed in various construction and mechanical applications due to its excellent balance of strength, weldability, and affordability.

Key Characteristics
Material: Carbon steel

Standard: JIS G3466 - Carbon steel pipes for ordinary structural purposes

Grade: STKR400

Minimum Yield Strength: 400 MPa (58,000 psi)

Tensile Strength: 400-510 MPa (58,000-74,000 psi)

Elongation: Minimum 17% (depending on pipe size and wall thickness)

Chemical Composition (typical):

Carbon (C): ≤ 0.30%

Manganese (Mn): ≤ 1.60%

Phosphorus (P): ≤ 0.040%

Sulfur (S): ≤ 0.040%

Advantages
High Strength: STKR400 offers a minimum yield strength of 400 MPa, making it suitable for load-bearing structures and components.

Good Weldability: The controlled carbon content and chemical composition ensure good weldability using common welding methods.

Cost-Effective: Compared to higher-grade steels, STKR400 provides a cost-effective solution for structural applications without compromising on essential strength requirements.

Wide Availability: Being a standard JIS grade, STKR400 pipes are readily available in various sizes and wall thicknesses.

Applications
STKR400 pipes find extensive use in a wide range of structural applications, including:

Building Construction:

Structural frames and columns

Roof trusses and purlins

Scaffolding and temporary structures

Bridge Construction:

Bridge girders and beams

Railings and guardrails

Industrial Structures:

Factory buildings and warehouses

Transmission towers and poles

Support structures for machinery and equipment

Other Applications:

Fencing and gates

Agricultural equipment

General-purpose structural components

Comparison With Other Grades
STKR400 is often compared to other structural steel grades like STK400 and SS400. While all three grades share similar minimum yield strengths, STKR400 offers slightly better weldability and formability due to its controlled chemical composition.

Conclusion
JIS G3466 STKR400 is a versatile and widely used carbon steel grade that provides an excellent combination of strength, weldability, and cost-effectiveness for various structural applications. Its availability, reliability, and compliance with JIS standards make it a preferred choice for engineers and contractors in Japan and other countries that adopt JIS standards.