Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

Our main products include 1/2inch to 16 inch ERW PIPE/GI PIPE which has been produced according to BS1387/ASTM A53/EN10219/EN10255/EN10217 Standard

Has rich experience in steel pipe processing, can be customized according to customer requirements according to the drawing and sample processing, assist in the development of new products.

Structural steel angles are widely used in construction and engineering applications due to their strength, versatility, and ease of fabrication. These angles are L-shaped steel profiles with two perpendicular legs that can be either equal or unequal in length. Let's delve into the details of both types.

H Sections , known for its H-shaped cross-section, is a critical component in various construction and engineering applications, Here is a brief description. Description: The web width (H) ranges from 100mm - 900mm. The flange width (B) from 100mm - 300mm. The web thickness (t1) from 5mm - 30mm. The flange thickness (t2) also from 5mm - 30mm. More to see EN 10365-2017. Common Grades: S235JR, S275JR, and S355JR according to EN10025. A36, A529, and A572 according to ASTM.

Standard: AS 3679 (Australian Standard for Structural Steel) Grade: 300,300L0, 300L15, 300S0 The standard applies to carbon and carbon-manganese steels supplied in the following forms: Hot-rolled plates, sheets, and strips Hot-rolled structural sections (e.g., beams, channels, angles) Bars for structural use It does not cover cold-formed steel (which falls under AS 1163) or stainless steel.

Angle steel is a versatile metal product with an L-shaped cross-section, widely used in construction, engineering, and manufacturing. Its classification is primarily based on the dimensions of its legs, material composition, and surface treatment.

H-beams, named for their H-shaped cross-section, are a type of structural steel widely used in construction and engineering. They consist of two parallel flanges connected by a vertical web, forming a shape similar to the letter “H”. This design provides a high strength-to-weight ratio and excellent load-bearing capacity.

JIS G3101 Steel Product Type: Plate/sheet, Strip in coil, Section, Flat and Bar,Circular Hollow Section(CHS) ,Rectangular Hollow Section(RHS), Square Hollow Section(SHS) Grades: SS330, SS400, SS490, SS540 Outside Diameter: 1/2 INCH - 24 INCH(CHS) 20MM × 20MM - 1200MM × 1200MM(SHS) 20MM × 30MM - 1000MM × 1500MM(RHS) Wall Thickness: 1.3MM - 22MM(CHS) 1.3MM - 50MM(SHS,RHS) Length: Commonly used 5.8M, 6M, 12M, but we can also produces depends on client's requirement. Common Process: ERW: 20MM - 660MM (OD) Wall Thickness: 1.3MM - 50MM SSAW: 219MM - 4084MM (OD) Wall Thickness: 7.75MM - 25.4MM Coating: Black paint, Varnish, Anti-rust oil. Applications: Construction, Mechanical Engineering, Shipbuilding, Automotive Industry.

< 123 >